Rectifier servo drives offer significant advantages in industrial metalworking processes and provide high
Provides sensitivity. When these systems are used in the processing of thick metal sheets, the natural
It can correct deformations and provide the desired shape smoothness. Front drive rollers
It processes the burrs created while slitting before they enter the straightening rollers. Afterwards, servo motors
Special upper and lower rollers, controlled by , create an isosceles triangle form and apply it on the sheet metal.
Applies gentle pressure. This eliminates deformations such as ovalization or convexity, and
It increases the smoothness of the metal sheet before it enters the mold or process. As a result, each pressing stroke is repeated with the same precision
improves product quality. It provides flexibility and versatility in the production line, thanks to the ability to create different programmable recipes for future productions.
For these reasons, the use of rectified servo drives in industrial production has become widespread and provides significant advantages for businesses.
Rectifying Servo Drives
A total of 9 roller straightening and driving groups (57-62 Rokvel hardness) with Ø60 induction rollers as 5+2+2 (3 at the bottom – 2 at the top – 2 crushing – 2 pulling),
Driven on the rollers by a gear drive group that moves from each other,
Pressure with short stroke pneumatic piston (4 bar) in crushing and pulling groups,
Angled swing system in the upper roller group,
Manually locking the upper roller group,
Pressure adjustment with double-sided reducer on straightening rollers,
Swing and guidance group with right and left double hard coil worm screw,
7″ touch screen,
Electronic parts (Driver, Motor, PLC, Screen),
999 mold memories (based on special recipe creation),
Electronic panel design provides easy use for the operator,
The product is produced as a tale,
Manual level adjustment is made with rubber carrier feet with M24 studs.
Sliding and straightening groups are collected in a single body, saving space.
By straightening the hair fed from the roller, it ensures that the final product comes out in the desired quality,
Optional options:
Hydraulic height level adjustment,
plotting system,
Waist bending and rowing system,
Depending on the sheet thickness, the number of rollers is 7+2+2. A straightening group with 11 rollers can be used.
Depending on the sheet thickness, a roller group with a roller diameter of Ø80 can be used.
- Band rolling and straightening up to 100 mm wide,
- Rolling and straightening capacity for sheets in the range of 0.40 – 2.5 mm thickness,
- Ø60 induction rollers with 5+2+2 (3 bottom – 2 top – 2 pressing – 2 pulling) totaling 9 roller straightening and rolling group (57-62 Rockwell hardness),
- Driven by gear rolling group with independent movement in the rollers,
- Press with short stroke pneumatic piston in pressing and pulling groups (4 bar),
- Angled swing system in the upper roller group,
- Manual locking of the upper roller group,
- Double-sided reducer for pressure adjustment in straightening rollers,
- 63 Body low backlash servo reducer,
- Dual hard coil swing and guiding group with endless screw on right and left,
- 7″ touch screen,
- 1.5 kW servo motor,
- Power : 1.5 kW
- Max Speed : 2000 rpm
- Encoder : 2500 pulse
- Nominal Torque : 7.5 Nm
- Max Torque : 18.75 Nm
- Electronic components (Driver, Motor, PLC, Screen),
- Memory for 999 molds (Based on creating special recipes),
- Electronic panel design provides ease of use for the operator,
- Product is manufactured with a table,
- Manual level adjustment is done with M24 threaded rubber carrier feet,
- Rolling and straightening groups are combined in a single body to save space,
- Produces sheet fed from the roll, straightening it to ensure the final product meets the desired quality,
- Optional features:
- Hydraulic height level adjustment,
- Plotting system,
- Edge trimming and shovel system,
- Depending on the sheet thickness, a straightening group with 11 rollers in a 7+2+2 configuration can be used.
- Depending on the sheet thickness, a roller group with a diameter of Ø80 can be used.
- Band rolling and straightening up to 200 mm wide,
- Rolling and straightening capacity for sheets in the range of 0.40 – 2.5 mm thickness,
- Ø60 induction rollers with 5+2+2 (3 bottom – 2 top – 2 pressing – 2 pulling) totaling 9 roller straightening and rolling group (57-62 Rockwell hardness),
- Driven by gear rolling group with independent movement in the rollers,
- Press with short stroke pneumatic piston in pressing and pulling groups (4 bar),
- Angled swing system in the upper roller group,
- Manual locking of the upper roller group,
- Double-sided reducer for pressure adjustment in straightening rollers,
- 63 Body low backlash servo reducer,
- Dual hard coil swing and guiding group with endless screw on right and left,
- 7″ touch screen,
- 2 kW servo motor,
- Power : 2 kW
- Max Speed : 2000 rpm
- Encoder : 2500 pulse
- Nominal Torque : 10 Nm
- Max Torque : 25 Nm
- Electronic components (Driver, Motor, PLC, Screen),
- Memory for 999 molds (Based on creating special recipes),
- Electronic panel design provides ease of use for the operator,
- Product is manufactured with a table,
- Manual level adjustment is done with M24 threaded rubber carrier feet,
- Rolling and straightening groups are combined in a single body to save space,
- Produces sheet fed from the roll, straightening it to ensure the final product meets the desired quality,
- Optional features:
- Motorized height level adjustment,
- Plotting system,
- Edge trimming and shovel system,
- Depending on the sheet thickness, a straightening group with 11 rollers in a 7+2+2 configuration can be used.
- Depending on the sheet thickness, a roller group with a diameter of Ø80 can be used.
- Band rolling and straightening up to 300 mm wide,
- Rolling and straightening capacity for sheets in the range of 0.60 – 3 mm thickness,
- Ø60 induction rollers with 5+2+2 (3 bottom – 2 top – 2 pressing – 2 pulling) totaling 9 roller straightening and rolling group (57-62 Rockwell hardness),
- Driven by gear rolling group with independent movement in the rollers,
- Press with short stroke pneumatic piston in pressing and pulling groups (4 bar),
- Angled swing system in the upper roller group,
- Manual locking of the upper roller group,
- Double-sided reducer for pressure adjustment in straightening rollers,
- 70 Body low backlash servo reducer,
- Dual hard coil swing and guiding group with endless screw on right and left,
- 7″ touch screen,
- 3 kW servo motor,
- Power : 3 kW
- Max Speed : 2000 rpm
- Encoder : 2500 pulse
- Nominal Torque : 14.3 Nm
- Max Torque : 35.75 Nm
- Electronic components (Driver, Motor, PLC, Screen),
- Memory for 999 molds (Based on creating special recipes),
- Electronic panel design provides ease of use for the operator,
- Product is manufactured with a table,
- Manual level adjustment is done with M24 threaded rubber carrier feet,
- Rolling and straightening groups are combined in a single body to save space,
- Produces sheet fed from the roll, straightening it to ensure the final product meets the desired quality,
- Optional features:
- Motorized height level adjustment,
- Plotting system,
- Edge trimming and shovel system,
- Depending on the sheet thickness, a straightening group with 11 rollers in a 7+2+2 configuration can be used.
- Depending on the sheet thickness, a roller group with a diameter of Ø80 can be used.
- Band rolling and straightening up to 400 mm wide,
- Rolling and straightening capacity for sheets in the range of 0.60 – 3 mm thickness,
- Ø60 induction rollers with 5+2+2 (3 bottom – 2 top – 2 pressing – 2 pulling) totaling 9 roller straightening and rolling group (57-62 Rockwell hardness),
- Driven by gear rolling group with independent movement in the rollers,
- Press with short stroke pneumatic piston in pressing and pulling groups (4 bar),
- Angled swing system in the upper roller group,
- Manual locking of the upper roller group,
- Double-sided reducer for pressure adjustment in straightening rollers,
- 70 Body low backlash servo reducer,
- Dual hard coil swing and guiding group with endless screw on right and left,
- 7″ touch screen,
- 3 kW servo motor,
- Power : 3 kW
- Max Speed : 2000 rpm
- Encoder : 2500 pulse
- Nominal Torque : 14.3 Nm
- Max Torque : 35.75 Nm
- Electronic components (Driver, Motor, PLC, Screen),
- Memory for 999 molds (Based on creating special recipes),
- Electronic panel design provides ease of use for the operator,
- Product is manufactured with a table,
- Manual level adjustment is done with M24 threaded rubber carrier feet,
- Rolling and straightening groups are combined in a single body to save space,
- Produces sheet fed from the roll, straightening it to ensure the final product meets the desired quality,
- Optional features:
- Motorized height level adjustment,
- Plotting system,
- Edge trimming and shovel system,
- Depending on the sheet thickness, a straightening group with 11 rollers in a 7+2+2 configuration can be used.
- Depending on the sheet thickness, a roller group with a diameter of Ø80 can be used.
- Band rolling and straightening up to 600 mm wide,
- Rolling and straightening capacity for sheets in the range of 0.60 – 3 mm thickness,
- Ø60 induction rollers with 5+2+2 (3 bottom – 2 top – 2 pressing – 2 pulling) totaling 9 roller straightening and rolling group (57-62 Rockwell hardness),
- Driven by gear rolling group with independent movement in the rollers,
- Press with short stroke pneumatic piston in pressing and pulling groups (4 bar),
- Angled swing system in the upper roller group,
- Manual locking of the upper roller group,
- Double-sided reducer for pressure adjustment in straightening rollers,
- 70 Body low backlash servo reducer,
- Dual hard coil swing and guiding group with endless screw on right and left,
- 7″ touch screen,
- 4 kW servo motor,
- Power : 4 kW
- Max Speed : 3000 rpm
- Encoder : 23 Bit
- Nominal Torque : 12.7 Nm
- Max Torque : 38.2 Nm
- Electronic components (Driver, Motor, PLC, Screen),
- Memory for 999 molds (Based on creating special recipes),
- Electronic panel design provides ease of use for the operator,
- Product is manufactured with a table,
- Manual level adjustment is done with M24 threaded rubber carrier feet,
- Rolling and straightening groups are combined in a single body to save space,
- Produces sheet fed from the roll, straightening it to ensure the final product meets the desired quality,
- Optional features:
- Motorized height level adjustment,
- Plotting system,
- Edge trimming and shovel system,
- Depending on the sheet thickness, a straightening group with 11 rollers in a 7+2+2 configuration can be used.
- Depending on the sheet thickness, a roller group with a diameter of Ø80 can be used.
Product Images
User Guide
